Inspector window with Two Pane Glass, Heater & Lamp.
03.
Port holes of 25 mm dia for specimen wiring.
04.
Chamber On delay timer.
05.
Specimen trays.
06.
Electrical terminals through wall
Systems Provided
• Air-Circulation system
1/20 Hp capacity continuous rated 230 Volts, single phase AC operated motor along with 12" dia fan has been provided for uniform temperature and humidity condition inside the chamber.
• Heating system
Low surface loading inconel tube heaters having capacity 500 watts-2nos. Has been provided to add heat inside the chamber. All the heaters are mounted in the conditioning space and will operate in the black zone.
• Humidity system
Low pressure moisture generator tank has been provided to generate the moisture and add humidity in the chamber. 2 KW capacity immersion heater having 1 V4 BSP threading has been provided inside the moisture generator tank. The moisture
generator tank has been provided along with low water level controller with
mechanical float type refilling arrangement .
• Control panel and wiring
Separate control panel provided on the top of the chamber which incorporate all the indicating and monitoring instruments with control switches, MCB'S , contactors, indicating lamps etc. All the wiring will be done as per IS color code with channel type wiring.
• Utilities provided
a. Chamber drain
b. Viewing window 30 x 30 cms 2 pane glass with low wattage heater
and manually operated wiper
c. Chamber interior light
d. Port hole 25 mm dia 1 no
e. Terminal panel - 6 nos 5 amp capacity
f. 30 Lts capacity S/S tank provided on the top for water storage
• Safety protections provided
a. MCB's for heaters
b. Over temperature safety cut-off with audio visual alarm.
c. Low water level indication with audio visual alarm
• Water requirement
30 Lts/day dematerialized water during the humidity test .
